Abtech IP3 Inplant Offices provide
the "End-User" with a Modular System which serves to
divide a large work space, such as a warehouse or a manufacturing
plant, with an environment suitable for the administration of
business. They can be designed as a single, open area unit, or
with interior walls to separate personal work space from a main
office area. Partitions can also be provided. Aesthetically pleasing
as well as functional, our Inplant Offices are manufactured to
create or augment any space so your business makes the impression
you want it to.
ONE & TWO STORY INPLANT
OFFICE MEZZANINE SYSTEMS
FORKLIFTABLE GUARD BOOTHS
COMPLETELY MODULAR DESIGN
EXPANDABLE AND RELOCATABLE
DESIGN AND ENGINEERING
MANY WALL FINISHES AVAILABLE
ENVIRONMENTAL CONTROL ROOMS
LEVEL INPLANT OFFICE
IP3 Series Inplant Offices can be constructed in a variety of ways,
using our predefined specifications, or implementing an "End-User"
custom design. Options for construction include single story or
two story modular office systems, and they can be built to serve
a specific purpose other than office space, such as Vision Towers.
As it is a completely modular system, expansion and flexibility
provide major construction advantages. The many upgrade opportunities
to enhance efficiency and utilization make the IP3 Series a great
way to integrate an office environment within any inclosed setting.
Call factory direct for prices
on standard or custom sizes.
Specifications are subject to change
The panels are nominal 3-inch thick with standard sizes from four
feet wide by eight feet tall to four feet wide by ten feet tall.
Custom heights over ten feet are also available. Panel construction
varies over a wide range.
- Standard panels are vinyl laminated 1/8"
tempered hardboard, both sides of honeycomb core.
- Fire and sound rated panels are vinyl laminated
1/2" gypsum, both sides of expanded polystyrene foam core.
- Exterior building panels have prefinished 1/8"
forest fiber hardboard exterior and vinyl laminated 1/8"
tempered hardboard interior with an expanded polystyrene foam
- Metal wall panels will have either 24 ga. pre-painted
steel or .019 prepainted aluminum skins laminated to 1/8"
tempered hardboard, both sides of honeycomb or expanded polystyrene
foam core. Many more custom panel configurations are available.
Posts are to be of four-piece design to form a non progressive wall
system. Cavity of posts will allow use of approved steel electrical
boxes that are now required by building codes. Posts shall also
act as raceways for phone lines, data lines, and other electrical
lines. Structural design loading on posts allows up to 4,500 vertical
pounds or an additional structural steel cavity insert can be installed
for loads up to 12,000 lbs. The structural elements of the posts
shall be connected by machine bolts and nuts no more than 18"
center line. All extrusions shall be 6063-T5 aluminum, minimum .062
thickness, with a clear anodized finish.
Corner posts will be of single piece construction and support loads
of up to 4,500 vertical pounds. Struc-tural steel cavity inserts
can be added for loads up to 12,000 pounds. Material will be 6063-T5
aluminum, minimum .062 thickness, and clear anodized finish.
Base channel provides support for wall panels and posts while allowing
space for anchors or post uplift connectors. Its low profile design
is aesthetically pleasing and eliminates the need for additional
base molding. Material shall be 6063-T5 aluminum, minimum .062 thick,
and clear anodized finish.
Wide Flange Structural Steel Beams span across the Mezzanine and
support the decking on 4' centerlines. They are predrilled for attachment
to Perimeter Channels.
Perimeter members are Structural-C sections of various sizes (depending
on loading and span) with predrilled Beam Flanges and ends for bolted
connections. These members are attached to the Columns and provide
support for Beams.
Columns are standard 8"x8"x1/4" Steel tubing. Steel
plate flanges are provided for bolted connections between Columns
and Perimeter Channels. Base Plates are minimum 12"x12"x1/2".
Gates can be provided for additional access for loading and unloading
materials. Lift Out, Hinged, Double Hinged, and Sliding are further
Optional materials include Office Enclosures top and bottom levels,
Multi story configurations, Wire Mesh Enclosures, Ladders, Closed
Riser Stairs, Multi Level Stairs and Landings, Catwalks, Lighting
Factory installation is available for the full line of materials.
are subject to change without notice.